To
enable us to give you the most accurate estimate for your project we need
certain information.
On this
page you can find a checklist. Much of this information may be included
in your drawings - but some may not, so please print this page for your
reference and check.
If you
have any questions, or are simply looking for a quick estimate of costs,
please email or call us on 01787
223931.
The
use to which the precast floor is to be put (i.e. domestic, games
room, garage, office, storage, etc...)
To
ensure floors is designed for correct loadings
The
superimposed (live) load that is required by the Architect/ Engineer.
To
ensure floors is designed for correct loadings
The
depth and type of floor finish that is to be applied to the precast
floor. (E.g. 50mm screed, 75mm screed, chipboard and polystyrene,
raised access flooring etc.)
To
ensure floors is designed for correct loadings
The
type of cieling finish to be applied to the underside of the precast
floor where applicable.
To
ensure floors is designed for correct loadings
The
direction that the precast floor units are to span between supports.
To
ensure floors span onto load bearing elements
Internal
dimensions between supporting walls, or centrelines of steelwork.
To
determine span of floor units
Perimeter
edge details (E.g. do floors cantilever over supports?)
