Downloads
- CAD Sections & Document
NEW
Milbank Air Mattress Safety Systems
|
Home
|
| Floor Quotation Checklist |
To enable us to give you the most accurate estimate for your project we need certain information.
On this page you can find a checklist. Much of this information may be included in your drawings - but some may not, so please print this page for your reference and check.
If you have any questions, or are simply looking for a quick estimate of costs, please email or call us on 01787 223931.
SCROLL
DOWN OR CLICK LINKS
• Contact info &
access
•
The floor itself
•
The floor & walls
•
The floor & stairs
•
The floor & voids and
openings
•
The floor and steelwork
OTHER
PAGES
•
Contact Details
| Checklist Part 1 - General Information |
| Information | Reason |
| Enquirers name and contact details and details of who the quote is to be sent to (if different) | |
| Site address and location for the development | Location can affect haulage costs |
| The area to be covered by the precast floor and the level of the floor (ground/ ground over basement/ first floor/ second floor/ etc...) | To ensure that the correct area of floor is quoted for |
| Are there any access or delivery restrictions? (E.g. are rgid lorries required, would delivery be required outside normal working hours?) | Working hours can affect the haulage and fixing costs |
| Checklist Part 2 - The Floor |
| Information | Reason |
| The use to which the precast floor is to be put (i.e. domestic, games room, garage, office, storage, etc...) | To ensure floors is designed for correct loadings |
| The superimposed (live) load that is required by the Architect/ Engineer. | To ensure floors is designed for correct loadings |
| The depth and type of floor finish that is to be applied to the precast floor. (E.g. 50mm screed, 75mm screed, chipboard and polystyrene, raised access flooring etc.) | To ensure floors is designed for correct loadings |
| The type of cieling finish to be applied to the underside of the precast floor where applicable. | To ensure floors is designed for correct loadings |
| The direction that the precast floor units are to span between supports. | To ensure floors span onto load bearing elements |
| Internal dimensions between supporting walls, or centrelines of steelwork. | To determine span of floor units |
| Perimeter edge details (E.g. do floors cantilever over supports?) | To determine extent of precast floor area. |
| Checklist Part 3 - Walls |
| Information | Reason |
| The type of thickness of the wall(s) that the precast floor units bear onto, both below and above the floor level. | To ensure that floors have the correct bearing at the supports |
| The type and thickness of finish to be applied to the wall(s) supported on the precast floor units. | To ensure that the floors ate designed to carry the partitions |
| If the wall(s) to be supported by the precast floor units carry load from above, what is the load to the wall(s) and /or what do the walls support. | To ensure that the floors are designed to carry the load bearing walls |
| Checklist Part 4- Stairs |
| Information | Reason |
|
Are the stairs supported off the precast floor, if so what type and span are the stairs. (i.e. timber, precast concrete etc) |
To ensure that the floors are designed to carry the stairs |
| A plan of the stairwell | To establish the size of the landings and how they are to be supported |
| A section through the stairwell showing the finished floor to finished floor dimension of each storey. | To establish the Rise and Going of the flights |
| What is the depth of finishes at each floor level? | To allow correct size and positioning of the top and bottom risers. |
| Checklist Part 5- Voids and openings |
| Information | Reason |
| The location and sizes of soil/vent pipes, gas, water mains etc. | To make adequate provision in the layout of the precast floor units |
| Size and position of all large voids and openings required in the precast floor | To make adequate provision in the layout of the precast floor units |
|
Types and sizes of steel trimmers provided in the supporting structure |
| Checklist Part 6- Steelwork |
| Information | Reason |
| Layout and dimensions to all steelwork | |
| The size and level of all steelwork, and type of support to the precast floor units. | |
|
Size, type and location of any surrounds to column, beams etc. |
|
|
||